Showing all 17 results
WAGO 750-514 2-channel relay output module. This digital output module transmits control signals from the automation device to the connected actuators. The internal system voltage triggers the relay. The NO contacts are electrically isolated. The state of the relay is indicated by a LED. Brand: WAGO Categories: Automation Technology Model: WAGO 750-514 WAGO 750-514 2-channel…
WAGO 750-1500 16-channel digital output module. This digital output module features 16 channels in a width of just 12 mm (0.47 inch). It transmits binary control signals from the automation device to the connected actuators (e.g., magnetic valves, contactors, transmitters, relays or other electrical loads). The module connects to electronic modules via a 20-pole ribbon…
WAGO 750-343 Fieldbus Coupler PROFIBUS DP. The ECO Fieldbus Coupler is designed for applications with a low data width in the process image. These are primarily applications that use digital process data or only low volumes of analog process data. The system supply is provided directly by the coupler. The field supply is provided via…
WAGO 750-485 2-channel analog input module. The WAGO I/O System 750 must be installed either in Zone 2 or in a non-hazardous area. This analog input module powers the intrinsically safe signal conditioners located in the hazardous areas of Zone 0+1 and processes their analog signals. The 24 V supply is derived from the module’s…
WAGO 750-559 4-channel analog output module. WAGO I/O System 750/753. This analog output module generates standard 0–10 V signals. The output signal is electrically isolated and transmitted with a resolution of 12 bits. The internal system supply powers the module. The module’s output channels have a common ground potential. Brand: WAGO Categories: Automation Technology Model:…
WAGO 750-455 4-channel analog input module. This analog input module processes standard 4–20 mA signals. The internal system supply powers the module. The input signal is electrically isolated and is transmitted with a resolution of 12 bits. The input channels of the module have a common ground potential. Brand: WAGO Categories: Automation Technology Model: WAGO…
WAGO 750-430 8-channel digital input module. Each input module has a noise-rejection filter. Field and system levels are electrically isolated. This digital input module features eight channels in a width of just 12 mm (0.47 inch). It receives control signals from digital field devices (e.g., sensors). Brand: WAGO Categories: Automation Technology Model: WAGO 750-430 WAGO…
WAGO 750-555 4-channel analog output module, WAGO I/O System 750/753. This analog output module generates standard 4–20 mA signals. The output signal is electrically isolated and transmitted with a resolution of 12 bits. Power is derived from the field side. The module’s output channels have a common ground potential. Brand: WAGO Categories: Automation Technology Model:…
WAGO 750-600 End Module. After the fieldbus node is assembled with the correct buscoupler and I/O modules, the end module is snapped onto the assembly. It completes the internal data circuit and ensures correct data flow. Brand: WAGO Categories: Automation Technology Model: WAGO 750-600 WAGO 750-600 End Module Width: 12 mm / 0.472 inches Height:…
WAGO 750-530 8-channel digital output module. This digital output module features eight channels in a width of just 12 mm (0.47 inch). The module transmits control signals from an automation device to connected actuators. All outputs are short-circuit-protected. Field and system levels are electrically isolated. Brand: WAGO Categories: Automation Technology Model: WAGO 750-530 WAGO 750-530…
WAGO 750-890 Controller Modbus TCP; 4th generation; 2 x ETHERNET, SD Card Slot. A data memory of 8 MB is available. The Modbus TCP Controller can be used as a programmable controller within ETHERNET networks in conjunction with the WAGO I/O System. The controller supports all digital, analog and specialty modules found within the 750/753…
WAGO 750-461 2-channel analog input module, For Pt100/RTD resistance sensors. This analog input module directly connects to Pt resistance sensors. Two- or three-wire sensors can be connected. The module automatically linearizes the entire temperature range. A sensor error (short circuit, line break or measurement range overflow) is indicated by a red LED. A green LED…
WAGO 750-375 Fieldbus Coupler PROFINET IO; 3rd Generation; Advanced. This fieldbus coupler connects the WAGO I/O System 750 to PROFINET IO (open, real-time Industrial ETHERNET automation standard). The coupler identifies the connected I/O modules and creates local process images for maximum two I/O controllers and one I/O supervisor according to preset configurations. This process image…
WAGO I/O SYSTEM 750 XTR – For Extreme Environments. The System for eXTReme Environments. XTR – this abbreviation stands for extreme protection against climatic influences, vibration, impacts and surge voltages. These conditions occur primarily in places where technology is exposed to weather. The automation systems used in these sectors often require additional expensive, space-intensive protection…
WAGO 750-362 Modbus TCP/UDP Fieldbus Coupler connects ETHERNET to the modular WAGO I/O System. The fieldbus coupler detects all connected I/O modules and creates a local process image. Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology, eliminating the need for additional network devices, such as switches…
WAGO 750-333 Fieldbus Coupler maps the peripheral data of all the WAGO I/O System’s I/O modules on PROFIBUS DP. When initializing, the coupler determines the node’s module structure and creates the process image of all inputs and outputs. Modules with a bit width smaller than eight are grouped in one byte for address space optimization….
WAGO I/O System 750/753 – For the Control Cabinet. Decentralized peripherals for every application: Boasting more than 500 I/O modules, programmable controllers and fieldbus couplers, WAGO’s remote I/O system offers all the functions required for your automation needs – and for every fieldbus. Brand: WAGO Categories: Automation Technology Model: WAGO 750 WAGO I/O System 750/753…
No products in the cart.
LEGAL DISCLAIMER
Wuhan Xieyuan automation equipment Co. is not an authorized dealer, agent or affiliate of any of the brands or manufacturer, the products of which are offered for sale on https://plcs-automation.com/. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources. Dismiss
