Showing 1–24 of 35 results
Beckhoff EK1501 EtherCAT Coupler with ID switch, multi-mode fiber optic. The EK1501 EtherCAT Coupler with multi-mode fiber-optic connection is the link between the EtherCAT protocol at fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. A station consists of a coupler and any number of…
Beckhoff EK1122 2-port EtherCAT junction. The EK1122 2-port EtherCAT junction can be used in an EtherCAT Terminal segment at any desired position between the EtherCAT Terminals and enables configuration of EtherCAT star topologies. A modular EtherCAT star hub can be realized by using several EK1122 units in a station. Special features: ● Connection technology: 2…
Beckhoff EK1110 EtherCAT extension. The EK1110 EtherCAT extension is placed at the end of an EtherCAT Terminal segment or an Embedded PC from the CX series and offers the option of extending the EtherCAT network in the form of a line topology. Special features: ● Connection technology: 1 x RJ45 socket ● Connection lengths: up…
Beckhoff EK1100 EtherCAT Coupler. The EK1100 EtherCAT Coupler is the link between the EtherCAT protocol at fieldbus level and the EtherCAT Terminals. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A station consists of a coupler and any number of EtherCAT Terminals that are automatically detected and individually displayed in…
Beckhoff EL9410 Power supply terminal for E-bus, with diagnostics. The EL9410 power supply terminal is used to refresh the E-bus. Data is exchanged between the coupler and the EtherCAT Terminal over the E-bus. Each terminal draws a certain amount of current from the E-bus (see “current consumption E-bus” in the technical data). This current is…
Beckhoff EL2809 EtherCAT Terminal, 16-channel digital output, 24 V DC, 0.5 A. The EL2809 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The power…
Beckhoff EL2024 EtherCAT Terminal, 4-channel digital output, 24 V DC, 2 A. The EL2024 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. The EtherCAT Terminal contains four channels whose signal state is indicated by LEDs. Direct connection…
Beckhoff EL2008 EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A. The EL2008 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. Each EtherCAT Terminal has eight channels that indicate their signal state via light emitting diodes….
Beckhoff EL1904 EtherCAT Terminal, 4-channel digital input, 24 V DC, TwinSAFE. The EL1904 TwinSAFE component is a digital input terminal for sensors with potential-free contacts for 24 V DC. It has four fail-safe inputs. The signals are transmitted via FSoE to a TwinSAFE Logic-capable component and can be used there to evaluate them in terms…
Beckhoff EL1809 EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms. The EL1809 digital input terminal acquires the binary 24 V control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The…
Beckhoff EL1008 EtherCAT Terminal, 8-channel digital input, 24 V DC, 3 ms. The EL1008 digital input terminal acquires the binary 24 V control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. Each EtherCAT Terminal has eight channels that indicate their signal state via light emitting…
Beckhoff EL6900 EtherCAT Terminal communication interface, TwinSAFE Logic. The EL6900 TwinSAFE component is a dedicated safety controller. It is used for the realization of safety-oriented applications on the basis of Boolean values. For this purpose, certified function blocks are available that enable the processing of safe input signals and the generation of safe output signals….
Beckhoff EL6731-0010 EtherCAT Terminal, 1-channel communication interface, PROFIBUS, master/slave. The PROFIBUS master terminal EL6731 supports the PROFIBUS protocol with all its features. Within an EtherCAT Terminal network, it enables the integration of any PROFIBUS devices. Thanks to the PROFIBUS chip developed in-house, the terminal is equipped with the latest version of the PROFIBUS technology –…
Beckhoff EL6731 EtherCAT Terminal, 1-channel communication interface, PROFIBUS, master/slave. The PROFIBUS master terminal EL6731 supports the PROFIBUS protocol with all its features. Within an EtherCAT Terminal network, it enables the integration of any PROFIBUS devices. Thanks to the PROFIBUS chip developed in-house, the terminal is equipped with the latest version of the PROFIBUS technology –…
Beckhoff EL6910 EtherCAT Terminal communication interface, TwinSAFE Logic. The EL6910 represents the new generation of dedicated safety controllers. While the EL6900 as its predecessor provided only function blocks based on Boolean values, the EL6910 offers a wide variety of certified function blocks that enable the safe processing of analog values and thus the implementation of…
Beckhoff EL6692 EtherCAT Terminal, communication interface, EtherCAT bridge. The EtherCAT bridge terminal EL6692 enables real-time data exchange between EtherCAT strands with different masters. It also enables synchronization of the distributed clocks of the individual strands. The power supply on the primary side (E-bus) comes from the E-bus, on the secondary side (RJ45) via an external…
Beckhoff EL5001 EtherCAT Terminal, 1-channel encoder interface, SSI. The EL5001 EtherCAT Terminal is an SSI master and enables the direct connection of an absolute encoder with SSI (synchronous serial interface). Both singleturn and multiturn encoders are supported. The 24 V supply of the encoder can be provided directly via the terminal connection points. The EL9505…
Beckhoff EL3022 EtherCAT Terminal, 2-channel analog input, current, 4…20 mA, 12 bit, differential. The EL3022 analog input terminal processes signals in the range between 4 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EtherCAT Terminal…
Beckhoff EL4132 EtherCAT Terminal, 2-channel analog output, voltage, ±10 V, 16 bit. The EL4132 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 16 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common…
Beckhoff EL4034 EtherCAT Terminal, 4-channel analog output, voltage, ±10 V, 12 bit. The EL4034 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common…
Beckhoff EL4024 EtherCAT Terminal, 4-channel analog output, current, 4…20 mA, 12 bit. The EL4024 analog output terminal generates signals in the range between 4 and 20 mA. The power is supplied to the process level with a resolution of 12 bits and is electrically isolated. Ground potential for the output channels of the EtherCAT Terminal…
Beckhoff EL4008 EtherCAT Terminal, 8-channel analog output, voltage, 0…10 V, 12 bit. The EL4008 analog output terminal generate signals in the range between 0 and 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common…
Beckhoff EL3204 EtherCAT Terminal, 4-channel analog input, temperature, RTD (Pt100), 16 bit. The EL3204 analog input terminal facilitates the direct connection of four resistance sensors. The measured resistance value can either be output directly in ohms or transformed into a temperature. If the temperature at the measuring point is of interest, the conversion from resistance…
Beckhoff EL3202 EtherCAT Terminal, 2-channel analog input, temperature, RTD (Pt100), 16 bit. The EL3202 analog input terminal facilitates the direct connection of two resistance sensors. The measured resistance value can either be output directly in ohms or transformed into a temperature. If the temperature at the measuring point is of interest, the conversion from resistance…
No products in the cart.
LEGAL DISCLAIMER
Wuhan Xieyuan automation equipment Co. is not an authorized dealer, agent or affiliate of any of the brands or manufacturer, the products of which are offered for sale on https://plcs-automation.com/. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources. Dismiss
