Showing 1–24 of 41 results
Yokogawa AAI141-H50 Analog Input Module (Current Input), 16-channel, 4 to 20 mA, non-isolated. They can be used in dual-redundant configuration. The analog I/O module (with HART communication function) connected to a transmitter or a valve positioner receives HART variable (*1) in addition to exchange analog input/output data by 4 – 20 mA signal with field…
Yokogawa AAI141-S50 Analog Input Module (Current Input), 16-channel, 4 to 20 mA, non-isolated. They can be used in dual-redundant configuration. The analog I/O module (with HART communication function) connected to a transmitter or a valve positioner receives HART variable (*1) in addition to exchange analog input/output data by 4 – 20 mA signal with field…
Yokogawa AAI143-H50/A4S10 Analog Input Module (Current Input), 16-channel, 4 to 20 mA, isolated. It can be used in dual-redundant configuration. The analog I/O module (with HART communication function) connected to a transmitter or a valve positioner receives HART variable (*1) in addition to exchange analog input/output data by 4 – 20 mA signal with field…
Yokogawa AAI143-S50/A4S10 Analog Input Module (Current Input), 16-channel, 4 to 20 mA, isolated. It can be used in dual-redundant configuration. The analog I/O module (with HART communication function) connected to a transmitter or a valve positioner receives HART variable (*1) in addition to exchange analog input/output data by 4 – 20 mA signal with field…
Yokogawa AAI543-H50/A4S10 Analog Output Module (Current Output), 16-channel, 4 to 20 mA, isolated, standard switch-over response in redundant configuration. The analog I/O module (with HART communication function) connected to a transmitter or a valve positioner receives HART variable (*1) in addition to exchange analog input/output data by 4 – 20 mA signal with field control…
Yokogawa AAI543-S50/K4A00 Analog Output Module (Current Output), 16-channel, 4 to 20 mA, isolated, standard switch-over response in redundant configuration. The analog I/O module (with HART communication function) connected to a transmitter or a valve positioner receives HART variable (*1) in addition to exchange analog input/output data by 4 – 20 mA signal with field control…
Yokogawa AAT145-S00 TC/mV Input Module (16-channel, Isolated channels). These modules receive signals from mV, thermocouple (TC), RTD, and potentiometer (POT), and they are isolated between the field and the system as well as in between each channel. They can be used in dual-redundant configuration.
Yokogawa AAT145-S50 TC/mV Input Module (16-channel, Isolated channels). These modules receive signals from mV, thermocouple (TC), RTD, and potentiometer (POT), and they are isolated between the field and the system as well as in between each channel. They can be used in dual-redundant configuration.
Yokogawa AAV144-S50/A4S10 Analog Input Module
Yokogawa ADV151-P50/D5A00 Digital Input Module
Yokogawa ADV151-P60/D5A00 Digital Input Module
Yokogawa ADV551-P50/D5A00 Digital Output Module
Yokogawa ADV551-P60/D5A00 Digital Output Module
Yokogawa AFV30D-A41252 Duplexed Field Control Unit (for Vnet/IP and FIO, 19-inch Rack Mountable).
Yokogawa AIP830-111 Operation Keyboard for Single-loop Operation. It contains an independent USB speaker (a sound function) other than buzzing alarms (buzzer sounds).
Yokogawa AIP831-111 Operation Keyboard for Eight-loop Simultaneous Operation. AIP831 is an Operation Keyboard for Eight-loop Simultaneous Operation for CENTUM VP’s Desktop Type HIS. AIP831 is equipped with 8-Loop Control keys which contains touch sensors for sensing the touches. (Touch sensors are used for “Instrument Faceplate Highlight” function of Desktop Type HIS.)
Yokogawa AKB331-M010 Signal Cable (50-50 pins) (for connection between SDV144/SDV531/SDV53A/SDV541/SAT145 and Terminal Board).
Yokogawa ALE111-S50 Ethernet Communication Module (for FIO). This document describes about Model ALE111 Ethernet Communication Module (for FIO) that a field control station (FCS) uses to perform Ethernet communication with subsystems such as FA-M3.
Yokogawa ALR121-S50 Serial Communication Modules (for FIO). This document describes about Models ALR111 and ALR121 Serial Communication Modules (for FIO) that a field control station (FCS) uses to perform serial communication with subsystems such as FA-M3. Yokogawa ALR111 / ALR121 Serial Communication Modules Yokogawa ALR111 / ALR121 Serial Communication Modules model
Yokogawa ALR121-S51 Serial Communication Modules (for FIO). This document describes about Models ALR111 and ALR121 Serial Communication Modules (for FIO) that a field control station (FCS) uses to perform serial communication with subsystems such as FA-M3. Yokogawa ALR111 / ALR121 Serial Communication Modules Yokogawa ALR111 / ALR121 Serial Communication Modules model
Yokogawa ANB10D-425/CU2N ESB Bus Node Unit (for FIO). The ESB Bus Node Unit has an interface function that communicates the analog I/O signals and contact I/O signals of a field with a Field Control Unit (FCU) via an ESB bus, as well as a function that supplies power to the I/O Modules. This node units…
Yokogawa ANB10D-425/CU2N/NDEL ESB Bus Node Unit (for FIO). The ESB Bus Node Unit has an interface function that communicates the analog I/O signals and contact I/O signals of a field with a Field Control Unit (FCU) via an ESB bus, as well as a function that supplies power to the I/O Modules. This node units…
No products in the cart.
LEGAL DISCLAIMER
Wuhan Xieyuan automation equipment Co. is not an authorized dealer, agent or affiliate of any of the brands or manufacturer, the products of which are offered for sale on https://plcs-automation.com/. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources. Dismiss
