/ / / Beckhoff EL6692 EtherCAT Terminal communication interface

Beckhoff EL6692 EtherCAT Terminal communication interface


100% New & Original

  • Done Satisfaction Guaranteed
  • Done No Hassle Refunds
  • Done Secure Payments
SKU: EL6692 Categories: , Tags: ,

Beckhoff EL6692 EtherCAT Terminal, communication interface, EtherCAT bridge. The EtherCAT bridge terminal EL6692 enables real-time data exchange between EtherCAT strands with different masters. It also enables synchronization of the distributed clocks of the individual strands. The power supply on the primary side (E-bus) comes from the E-bus, on the secondary side (RJ45) via an external connection. If several EL6692 are used, data traffic to the terminals on the other side can continue in the event of a power supply failure on one side. The bridge terminal can also be used for integrating a subordinate PC system as an EtherCAT slave.
The data exchange between EtherCAT networks can be implemented with Beckhoff components in a wide variety of ways in order to cover diverse system requirements. Therefore, the possibilities should also be checked with the “similar products” listed below, the FCxxxx fieldbus cards or the B110 interface on various CX Embedded PCs.

Model: EL6692
Categories: EtherCAT Terminal
Brand: Beckhoff

Beckhoff EL6692 EtherCAT Terminal communication interface

Technical data EL6692
Technology primary side: E-bus (terminal strand), secondary side: 2 x 100 Mbit/s Ethernet, RJ45, In/Out
Ports primary: E-bus, secondary: 2 x RJ45 EtherCAT input/output
Function EtherCAT distributed clock synchronization, data exchange
Cable length 100 m 100BASE-TX, secondary port
Hardware diagnostics status LEDs
Power supply primary: via the E-bus, secondary: via connector
Distributed clocks yes
Electrical isolation 500 V (E-bus/secondary side)
Current consumption E-bus: 120 mA; external: 60 mA/24 V (see documentation)
Bit width in the process image 16 bit SYNC input + IO input/output, max. 480 bytes in each direction
Current consumption power contacts
Current consumption E-bus 120 mA (E-bus), typ. 60 mA/24 V (external)
Special features usable in TwinCAT as a reference clock, supports ADS over EtherCAT (AoE)
Weight approx. 75 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable
Approvals/markings CE, UL, ATEX, IECEx
Ex marking ATEX:
II 3 G Ex nA IIC T4 Gc
Ex ec IIC T4 Gc
Housing data EL-24
Design form compact terminal housing with signal LEDs
Material polycarbonate
Dimensions (W x H x D) 24 mm x 100 mm x 52 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Wiring specific push-in connection


There are no reviews yet.

Be the first to review “Beckhoff EL6692 EtherCAT Terminal communication interface”

Your email address will not be published. Required fields are marked *