-

Beckhoff EL6900 EtherCAT Terminal communication interface, TwinSAFE Logic. The EL6900 TwinSAFE component is a dedicated safety controller. It is used for the realization of safety-oriented applications on the basis of Boolean values. For this purpose, certified function blocks are available that enable the processing of safe input signals and the generation of safe output signals….
-

$515.00
Beckhoff EL6731-0010 EtherCAT Terminal, 1-channel communication interface, PROFIBUS, master/slave. The PROFIBUS master terminal EL6731 supports the PROFIBUS protocol with all its features. Within an EtherCAT Terminal network, it enables the integration of any PROFIBUS devices. Thanks to the PROFIBUS chip developed in-house, the terminal is equipped with the latest version of the PROFIBUS technology –…
-

$546.00
Beckhoff EL6731 EtherCAT Terminal, 1-channel communication interface, PROFIBUS, master/slave. The PROFIBUS master terminal EL6731 supports the PROFIBUS protocol with all its features. Within an EtherCAT Terminal network, it enables the integration of any PROFIBUS devices. Thanks to the PROFIBUS chip developed in-house, the terminal is equipped with the latest version of the PROFIBUS technology –…
-

$1002.00
Beckhoff EL6910 EtherCAT Terminal communication interface, TwinSAFE Logic. The EL6910 represents the new generation of dedicated safety controllers. While the EL6900 as its predecessor provided only function blocks based on Boolean values, the EL6910 offers a wide variety of certified function blocks that enable the safe processing of analog values and thus the implementation of…
-

$452.00
Beckhoff EL6692 EtherCAT Terminal, communication interface, EtherCAT bridge. The EtherCAT bridge terminal EL6692 enables real-time data exchange between EtherCAT strands with different masters. It also enables synchronization of the distributed clocks of the individual strands. The power supply on the primary side (E-bus) comes from the E-bus, on the secondary side (RJ45) via an external…
-

$316.00
Beckhoff EL5001 EtherCAT Terminal, 1-channel encoder interface, SSI. The EL5001 EtherCAT Terminal is an SSI master and enables the direct connection of an absolute encoder with SSI (synchronous serial interface). Both singleturn and multiturn encoders are supported. The 24 V supply of the encoder can be provided directly via the terminal connection points. The EL9505…
-

$281.00
Beckhoff EL3022 EtherCAT Terminal, 2-channel analog input, current, 4…20 mA, 12 bit, differential. The EL3022 analog input terminal processes signals in the range between 4 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EtherCAT Terminal…
-

$369.00
Beckhoff EL4132 EtherCAT Terminal, 2-channel analog output, voltage, ±10 V, 16 bit. The EL4132 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 16 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common…
-

$329.00
Beckhoff EL4034 EtherCAT Terminal, 4-channel analog output, voltage, ±10 V, 12 bit. The EL4034 analog output terminal generates signals in the range between -10 and +10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common…
-

$288.00
Beckhoff EL4024 EtherCAT Terminal, 4-channel analog output, current, 4…20 mA, 12 bit. The EL4024 analog output terminal generates signals in the range between 4 and 20 mA. The power is supplied to the process level with a resolution of 12 bits and is electrically isolated. Ground potential for the output channels of the EtherCAT Terminal…
-

$419.00
Beckhoff EL4008 EtherCAT Terminal, 8-channel analog output, voltage, 0…10 V, 12 bit. The EL4008 analog output terminal generate signals in the range between 0 and 10 V. The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated. The output channels of the EtherCAT Terminal have a common…
-

$341.00
Beckhoff EL3204 EtherCAT Terminal, 4-channel analog input, temperature, RTD (Pt100), 16 bit. The EL3204 analog input terminal facilitates the direct connection of four resistance sensors. The measured resistance value can either be output directly in ohms or transformed into a temperature. If the temperature at the measuring point is of interest, the conversion from resistance…
-

$320.00
Beckhoff EL3202 EtherCAT Terminal, 2-channel analog input, temperature, RTD (Pt100), 16 bit. The EL3202 analog input terminal facilitates the direct connection of two resistance sensors. The measured resistance value can either be output directly in ohms or transformed into a temperature. If the temperature at the measuring point is of interest, the conversion from resistance…
-

$482.00
Beckhoff EL3164 EtherCAT Terminal, 4-channel analog input, voltage, 0…10 V, 16 bit, single-ended. The EL3164 analog input terminal processes signals in the range between 0 and 10 V. The voltage is digitized with a resolution of 16 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3164 EtherCAT Terminal features 2-wire conductors…
-

$359.00
Beckhoff EL3104 EtherCAT Terminal, 4-channel analog input, voltage, ±10 V, 16 bit, differential. The EL3104 analog input terminal processes signals in the range between -10 and +10 V. The voltage is digitized to a resolution of 16 bits, and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EL3104 EtherCAT…
-

$188.00
Beckhoff EL3061 EtherCAT Terminal, 1-channel analog input, voltage, 0…10 V, 12 bit, single-ended. The EL3061 analog input terminal processes signals in the range between 0 and 10 V. The voltage is digitized to a resolution of 12 bits and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EtherCAT Terminal…
-

$268.00
Beckhoff EL3054 EtherCAT Terminal, 4-channel analog input, current, 4…20 mA, 12 bit, single-ended. The EL3054 analog input terminal processes signals in the range between 4 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The input electronics are independent of the…
-

$279.00
Beckhoff EL3048 EtherCAT Terminal, 8-channel analog input, current, 0…20 mA, 12 bit, single-ended. The EL3048 analog input terminal processes signals in the range between 0 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3048 EtherCAT Terminal combines eight channels…
-

$205.00
Beckhoff EL3064 EtherCAT Terminal, 4-channel analog input, voltage, 0…10 V, 12 bit, single-ended. The EL3064 analog input terminal processes signals in the range between 0 and 10 V. The voltage is digitized with a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3064 EtherCAT Terminal features 2-wire conductors…
-

$296.00
Beckhoff EL3068 EtherCAT Terminal, 8-channel analog input, voltage, 0…10 V, 12 bit, single-ended. The EL3068 analog input terminal processes signals in the range between 0 and 10 V. The voltage is digitized with a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3068 EtherCAT Terminal combines eight channels…
-

$349.00
Beckhoff EL3058 EtherCAT Terminal, 8-channel analog input, current, 4…20 mA, 12 bit, single-ended. The EL3058 analog input terminal processes signals in the range between 4 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The input electronics are independent of the…
-

$505.00
Beckhoff EL6751 EtherCAT Terminal, 1-channel communication interface, CANopen, master/slave. The Terminal enables within an EtherCAT Terminal network the integration of any CANopen devices and can either be master (EL6751) or slave (EL6751-0010). In addition, general CAN messages can be sent or received – without having to bother with CAN frames in the applications program. The…
-
Sale!

$1500.00 $985.00
Beckhoff EL6631-0010 EtherCAT Terminal, 2-port communication interface, PROFINET RT, device. Protocols such as LLDP or SNMP can be used for network diagnosis. The EL6631-0010 PROFINET RT device (slave) terminal enables simple exchange of data between EtherCAT and PROFINET RT. It is a device in the EtherCAT strand, which can consist of up to 65,535 devices….
-
Sale!

$1800.00 $1099.00
Beckhoff EL6631 EtherCAT Terminal, 2-port communication interface, PROFINET RT, controller. Protocols such as LLDP or SNMP can be used for network diagnosis. The EL6631 PROFINET RT controller (master) terminal supports the complete real-time function (RT) as well as extensive diagnostic possibilities. All services in accordance with Conformance Class B are supported. Up to 15 PROFINET…